STI Medical Waste Systems - 1000 lb/hr Unit
|
- Fully Automated Siemens touch screen controller
with off-site diagnostics capability monitored by WR2
engineers.
- Lowest Operating Cost @ US $0.03 - $0.04 per
lb.
- Up to 90% Bulk Reduction
- Environmentally Friendly
- Continuous Feed, Quiet Operation, and No Harsh
Odors
- Automatic Waste Cart Disinfection
- Proven Commercial Sites
- Outstanding Reliability and Customer Service
|
| 1000lb/hr |
Throughput capacity
|
1000 lb (455 kg) per hour |
Operating temperature
|
Waste in Auger Chamber: 205-212˚F (96-100˚C)
Steam in Auger
Chamber Jacket: 220-240˚F (104-115˚C) |
Construction material
|
Stainless Steel (optional painted steel) |
Dumper
|
Hydraulic |
Available configuration
|
Floor or Dock Mounted Door |
Safety
|
- Safety Switches on all Access Panels
- Door Release Inside Cart Dumper
- Siemens PLC Monitored Alarm Matrix
- Spore Testing Made Easy
- Operator and Maintenance Training Program
|
Electrical Controls
|
Shredder: NEMA 4 cabinet
Main: NEMA 4 with Siemens PLC and touch screen |
HEPA Filter
|
Min. Operational Efficiency of 99.97@0.3 microns |
Steam in Auger Chamber
|
≥ 60 Minutes |
| Maximum cart size |
220 gallons (800 liters) x 2 Carts/Lift |
| Recommended utilities |
Sewer: 4" flush
trapped floor drain to accept 4" I.D. connection.
Make-Up Air: 1400 CFM (If installed indoors)
Ventilation:
4" to outside above roof (steam) (piping by others)
8" to outside above roof (HEPA) (piping by others)
Steam: 400-500 lb/hr minimum flow regulated
to 13-14 PSIG Max. and 1" minimum diameter Pressure Relief Valve
set @ 14 PSIG Max.
Electric: Shredder: 480 VAC, 3 Phase
plus Ground, 150 Amp, 60 Hertz
Communications: Ethernet Cat5 preferred
or Standard 4 wire analog with call access
(All utilities within 10 feet of unit) |
| Options |
- Stainless Steel or Painted Steel Construction
- Floor Mounted or Dock Mounted Door
- Door Entry Location is Flexible
- Hood Over Dumper
- Waste Carts
- Service Contract
- Additional Training Services
|
